Menu
Your Cart

Trend

Model: 10/10X1/2TC EAN: 5027654001318
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose...
£42.54
Ex Tax:£35.45
Model: 10/11X1/2TC EAN: 5027654001332
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose...
£40.44
Ex Tax:£33.70
Model: 10/12X1/2TC EAN: 5027654001349
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose...
£71.34
Ex Tax:£59.45
Model: 10/1X1/2TC EAN: 5027654036426
Use for producing mortar grooves and for bevelling applications...
£43.02
Ex Tax:£35.85
Model: 10/22X1/2TC EAN: 5027654001387
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens...
£44.63
Ex Tax:£37.19
Model: 10/23X3/8TC EAN: 5027654001400
Especially designed bevel cutter for routing Corian, which is used in many bathrooms and kitchens...
£57.48
Ex Tax:£47.90
Model: 10/25X1/2TC EAN: 5027654001417
Two flute straight cutter with 3 degree taper.Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily...
£35.22
Ex Tax:£29.35
Model: 10/2X1/2TC EAN: 5027654035665
Use for producing mortar grooves and for bevelling applications...
£46.72
Ex Tax:£38.93
Model: 10/30X1/2TC EAN: 5027654034675
To increase gluing area producing a strong joint in drawer production...
£30.53
Ex Tax:£25.44
Model: 10/40X1/2TC EAN: 5027654045435
To rout butterfly key and splines in timbers and man-made boards.Use in conjunction with 104 deg (14 deg) dovetail cutter ref. L120 which cuts dovetail pocket.Use in a router table. Cut material in two passes to create a butterfly shape, width of butt..
£51.37
Ex Tax:£42.81
Model: 10/50X1/2TC EAN: 5027654058145
To make round boxes, planters, barrels or other multi-sided components. One side of the component is machined with the cutter.Fast and accurate joint creation on timber.For use in a router table.Notch created by cutter provides a larger glueing area f..
£49.36
Ex Tax:£41.13
Model: 10/51X1/2TC EAN: 5027654058152
To make round boxes, planters, barrels or other multi-sided components. One side of the component is machined with the cutter.Fast and accurate joint creation on timber.For use in a router table.Notch created by cutter provides a larger glueing area f..
£43.85
Ex Tax:£36.54
Model: 10/97X1/4TC EAN: 5027654025284
Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can also be used..
£69.25
Ex Tax:£57.71
Model: 10/99X1/2TC EAN: 5027654001486
Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can also be used f..
£79.30
Ex Tax:£66.08
Model: 1004/10TC EAN: 5027654001530
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materi..
£22.78
Ex Tax:£18.98
Model: 1004/15TC EAN: 5027654001578
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materi..
£34.55
Ex Tax:£28.79
Model: 1004/18TC EAN: 5027654001592
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materi..
£35.80
Ex Tax:£29.83
Model: 1004/20TC EAN: 5027654001615
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materi..
£46.15
Ex Tax:£38.46
Model: 1004/25TC EAN: 5027654001646
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materi..
£46.88
Ex Tax:£39.07
Model: 1004/29TC EAN: 5027654021132
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materi..
£48.44
Ex Tax:£40.37
Showing 1 to 20 of 4681 (235 Pages)