Model: RT/75X1/2TC
EAN: 5027654049969
Ball bearings fitted to both nose and shank.Allows templates to be placed either on top or the bottom of the material, for ease of routing.Allows for irregular grained timber to be profiled more easily by turning component other way round. Two blade to..
£83.23
Ex Tax:£69.36
Model: RT/80X1/2TC
EAN: 5027654034750
One blade. Blades can be rotated in 90 degree increments, giving three new edges. Specifically designed for CNC machines...
£53.94
Ex Tax:£44.95
Model: RT/81X1/4TC
EAN: 5027654040539
One blade. Blades can be rotated in 90 degree increments, giving three new edges...
£43.54
Ex Tax:£36.28
Model: RT/FENCE/A
EAN: 5027654053584
Back fence complete for incorporation into user made router tables.Sliding cheeks to reduce cutter aperture size.With edge planing facility of 1.4mm and 2.4mm. Comes with a top featherboard pressure and a clear safety guard.Supplied with dust spout ap..
£84.82
Ex Tax:£70.68
Model: RT/KEY
EAN: 5027654019337
Replacement key for the rota-tip cutters.Gives positive and quick action to help prevent overtightening and to allow quick tightening of the screw...
£3.94
Ex Tax:£3.28
Model: RT/KEY/1.5
EAN: 5027654030844
Replacement key for the rota-tip cutters.Gives positive and quick action to help prevent overtightening and to allow quick tightening of the screw...
£7.02
Ex Tax:£5.85
Model: RT/KEY/T9
EAN: 5027654041604
Torx key...
£3.94
Ex Tax:£3.28
Model: RT/M3.0
EAN: 5027654040720
Replacement dome screw for Ref. RT/331 and RT/391...
£3.28
Ex Tax:£2.73
Model: RTI/PLATE
EAN: 5027654521946
A large rigid router table insert plate for incorporation into user-made router tables. Thermoset phenolic.Two concentric snap-in rings. Three hole sizes of 98mm, 68mm & 32mm dia. Concentric rings and radial lines on underside for easy centring of..
£48.36
Ex Tax:£40.30
Model: RTI/SHIELD
EAN: 5027654523384
A shield is available for use with the Router Table Insert Plate, when using guided cutters and no backfence...
£18.84
Ex Tax:£15.70
Model: RTS/1000
EAN: 5027654523377
A large 1 metre long bladed T-square for use with a router. Blade has two parallel edges to allow a router to run on both edges.Allows a router to rout an edge square.The butt has two M5 tapped holes for fitting of a false fence.Ideal for grooving, t..
£69.77
Ex Tax:£58.14
Model: S11/01X1/4STC
EAN: 5027654027943
Solid Carbide for long life. Ideal for engraving and veining work...
£46.88
Ex Tax:£39.07
Model: S11/11X1/4STC
EAN: 5027654019344
Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing...
£65.08
Ex Tax:£54.23
Model: S11/11X8MMSTC
EAN: 5027654030219
Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing...
£65.08
Ex Tax:£54.23
Model: S2/6X1/4STC
EAN: 5027654019368
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.Offers better plunge cutting characteristics than TCT.Many more re-sharpenings can be obtained from STC..
£39.23
Ex Tax:£32.69
Model: S3/12X1/4STC
EAN: 5027654019375
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.Offers better plunge cutting characteristics than TCT.Many more re-sharpenings can be obtained from STC..
£35.11
Ex Tax:£29.26
Model: S3/21X1/4STC
EAN: 5027654019382
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.Offers better plunge cutting characteristics than TCT.Many more re-sharpenings can be obtained from STC..
£43.12
Ex Tax:£35.93
Model: S3/22X1/4STC
EAN: 5027654019399
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.Offers better plunge cutting characteristics than TCT.Many more re-sharpenings can be obtained from STC..
£36.17
Ex Tax:£30.14
Model: S3/50X3/8STC
EAN: 5027654019405
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.Offers better plunge cutting characteristics than TCT.Many more re-sharpenings can be obtained from STC..
£49.93
Ex Tax:£41.61
Model: S3/81X1/2STC
EAN: 5027654019412
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.Offers better plunge cutting characteristics than TCT.Many more re-sharpenings can be obtained from STC..
£93.11
Ex Tax:£77.59