Model: UNI/CS
EAN: 5027654021064
This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with fl..
£25.62
Ex Tax:£21.35
Model: UNI/GB16
EAN: 5027654320099
Replacement 16mm plastic line-up guide bush for the UNIBASE...
£4.96
Ex Tax:£4.13
Model: UNI/PIN/1
EAN: 5027654320105
Replacement line-up pin for the UNIBASE...
£2.42
Ex Tax:£2.02
Model: UNI/PIN/2
EAN: 5027654320112
Replacement line-up pin for the UNIBASE...
£2.42
Ex Tax:£2.02
Model: VARIJIG
EAN: 5027654538043
Adjustable frame and guide for use with a router.Adjustable frame for rectangles and squares.Allows a router to cut recesses, slots, face panel moulds etc. Can also be used to create panel doors for kitchens etc.Four lengths of 700mm extrusion with du..
£88.74
Ex Tax:£73.95
Model: VJS/AG/36
EAN: 5027654549797
Variable angle guide for the router or saw.Adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw.Adjustable angle range from 25 degree to 155 degree.Preset angle for 30, 45, 60, 90, 120, 135 and 150 degree.Route..
£72.02
Ex Tax:£60.02
Model: VJS/CG/24
EAN: 5027654554654
For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.Ideal for holding and clamping work pieces.Aluminium extrusion incorporating T-slots.The clamps are fitted w..
£33.46
Ex Tax:£27.88
Model: VJS/CG/36
EAN: 5027654554616
For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.Ideal for holding and clamping work pieces.Aluminium extrusion incorporating T-slots.The clamps are fitted w..
£29.16
Ex Tax:£24.30
Model: VJS/CG/50
EAN: 5027654554623
For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.Ideal for holding and clamping work pieces.Aluminium extrusion incorporating T-slots.The clamps are fitted w..
£44.70
Ex Tax:£37.25
Model: VJS/CG/AGS
EAN: 5027654555729
Varijig clamp guide adjustable guide stop.A short alloy extrusion rail that can be fixed anywhere along the length of the Varijig clamp guide.The removable alloy adjustable bridge guide stop can be locked in place so that it limits the rail travel in a..
£16.73
Ex Tax:£13.94
Model: VJS/CG/BBC
EAN: 5027654557020
Varijig clamp guide back to back clips.Clips comprise of alloy brackets and knobs.Allows two Varijig clamp guides to be joined back to back.Clamp one clamp guide to the bench and use the clips to attach another clamp guide upside down.Raises component..
£12.80
Ex Tax:£10.67
Model: VJS/CG/ESB
EAN: 5027654554678
Varijig clamp guide adjustable end stop block.Engages in the T slot on the clamp guide extrusion and can be locked in position using locking knob.Can be used with all Varijig frame system extrusions.Varijig clamp guide not included...
£11.50
Ex Tax:£9.58
Model: VJS/CG/EXT
EAN: 5027654554722
Lever extension handle for Varijig clamp guides. Gives better leverage to operate the clamp, especially when more clamping pressure is required.Slides onto Varijig clamp guide lever.Increases lever length by 134mm.Varijig clamp guide not included...
£6.92
Ex Tax:£5.77
Model: VJS/CG/FB
EAN: 5027654556337
Feather board finger pressure accessory for Varijig clamp guides.Clamps to the Varijig clamp guide which can then be clamped to a router table top.Provides horizontal side pressure for safer table routing.Varijig clamp guide not included. Guard remove..
£12.14
Ex Tax:£10.12
Model: VJS/CG/PRO8
EAN: 5027654555002
Extra long clamp guide for accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.Ideal for holding and clamping work pieces.This extra long clamp features a wider alum..
£166.56
Ex Tax:£138.80
Model: VJS/CG/RBP
EAN: 5027654554708
Plunge router base base accessory for the Varijig clamp guides.Base plate engages in the T-slot in the extrusion.Made from clear plastic. Includes adjustable guide bar for perfect tracking using hex key provided.Fits all Varijig clamp guides.Clear pl..
£24.52
Ex Tax:£20.43
Model: VJS/CG/SBP
EAN: 5027654554715
Circular saw base base accessory for the Varijig clamp guides.Base plate engages in the T-slot in the extrusion.Made from plastic.Includes adjustable guide bar for perfect tracking using hex key provided.Includes adjustable guide bar for perfect track..
£24.52
Ex Tax:£20.43
Model: VJS/CG/SQA
EAN: 5027654554685
Allows Varijig clamp guide to be squared up more accurately. Large 90 degree head allows the Varijig clamp guide to be used as a clamping T- square.Serrated front edge for grip.It is secured to fixed jaw using two self tapping screws.Varijig clamp g..
£12.14
Ex Tax:£10.12
Model: VJS/CG/WJK
EAN: 5027654554692
Pair of plastic jaws that are screwed onto the jaws of the Varijig clamp guides.Distributes clamping pressure over the workpiece to minimise clamping marks.Allows Varijig clamp guide to be squared up to the wood edge.Built in mounting holes allow a bat..
£8.23
Ex Tax:£6.86
Model: VJS/CK
EAN: 5027654538074
Pair of sliding friction clamps with 32mm clamping thickness.The clamp can be used with the Varijig system including the varijig set, straight guides and angle guide.Aluminium body...
£28.52
Ex Tax:£23.77