Model: 46/6BX1/4TC
EAN: 5027654009048
Cut a wider edge line, at an angle of 45 degrees.A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges...
£36.30
Ex Tax:£30.25
Model: 46/6CX1/4TC
EAN: 5027654009062
Cut a wider edge line, at an angle of 30 degrees.A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges...
£33.71
Ex Tax:£28.09
Model: 46/6DX1/4TC
EAN: 5027654033715
Cut a wider edge line, at an angle of 82 degrees.A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Has a gap between the tips and bearing, to reduce adhesive build-up...
£19.51
Ex Tax:£16.26
Model: 46/6EX1/4TC
EAN: 5027654048498
Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath...
£18.12
Ex Tax:£15.10
Model: 46/7/50X1/4TC
EAN: 5027654009079
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded...
£56.63
Ex Tax:£47.19
Model: 46/75X1/2TC
EAN: 5027654009130
Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings...
£43.49
Ex Tax:£36.24
Model: 46/75X1/4TC
EAN: 5027654009147
Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings...
£33.72
Ex Tax:£28.10
Model: 46/7X1/4TC
EAN: 5027654009154
Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity...
£49.79
Ex Tax:£41.49
Model: 46/8/50X1/2TC
EAN: 5027654009161
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded...
£56.63
Ex Tax:£47.19
Model: 46/8/50X1/4TC
EAN: 5027654009178
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded...
£56.63
Ex Tax:£47.19
Model: 46/80X1/4TC
EAN: 5027654009185
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc...
£23.80
Ex Tax:£19.83
Model: 46/82X1/2TC
EAN: 5027654009192
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work...
£50.39
Ex Tax:£41.99
Model: 46/85X1/4TC
EAN: 5027654029800
Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line...
£22.19
Ex Tax:£18.49
Model: 46/9/50X1/4TC
EAN: 5027654032954
For window boards 25mm thick. Two passes create shallow nosing...
£49.30
Ex Tax:£41.08
Model: 46/9/60X1/4TC
EAN: 5027654033425
For window boards 25mm thick. Two passes create shallow nosing...
£36.79
Ex Tax:£30.66
Model: 46/900X1/4TC
EAN: 5027654046869
Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trim..
£16.14
Ex Tax:£13.45
Model: 46/902X1/4TC
EAN: 5027654043592
Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trim..
£20.62
Ex Tax:£17.18
Model: 46/903X1/4TC
EAN: 5027654052365
Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trim..
£40.00
Ex Tax:£33.33
Model: 46/904X1/4TC
EAN: 5027654052372
Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trim..
£40.73
Ex Tax:£33.94
Model: 46/90X1/4TC
EAN: 5027654009215
Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trim..
£37.26
Ex Tax:£31.05