Model: 47/50SX1/2TC
EAN: 5027654024171
Combination pierce and trim cutters.Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower.Specially designed for the caravan building industry, used for cutting apertures in windows, doors & the floor pan...
£44.11
Ex Tax:£36.76
Model: 47/7X1/4TC
EAN: 5027654009406
For trimming top & lip. Economical cutters, perform 3 functions:1. To top trim the overlay at 90 degrees.2. To trim the overlay at 45 degrees or 60 degrees.3. The base of the cutter can trim the vertical lipping at 90 degrees.Requires side fence or..
£20.62
Ex Tax:£17.18
Model: 49/50X1/4HSS
EAN: 5027654009420
This countersink can be used at high speeds for countersinking alloy.All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped...
£31.03
Ex Tax:£25.86
Model: 49/70X1/4HSS
EAN: 5027654009451
These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinking mild steel, iron and plastics.Multi flute design.Ground shank for greater running accuracy...
£23.32
Ex Tax:£19.43
Model: 49/71X10MMHSS
EAN: 5027654009468
These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinking mild steel, iron and plastics.Multi flute design.Ground shank for greater running accuracy...
£33.13
Ex Tax:£27.61
Model: 5/3X1/4TC
EAN: 5027654009499
Two flute TC cutter giving good chip clearance.Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel...
£21.19
Ex Tax:£17.66
Model: 5/52X1/2TC
EAN: 5027654009505
TCT cutter with staggered cutting surfaces.Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise...
£44.63
Ex Tax:£37.19
Model: 5/53X1/2TC
EAN: 5027654009512
TCT cutter with staggered cutting surfaces.Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. The lock mortiser will plunge and clear chips to a depth of 70..
£46.20
Ex Tax:£38.50
Model: 50/03X1/4HSSE
EAN: 5027654009529
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£17.53
Ex Tax:£14.61
Model: 50/03X8MMHSSE
EAN: 5027654009536
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£15.43
Ex Tax:£12.86
Model: 50/04X8MMHSSE
EAN: 5027654009550
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£15.95
Ex Tax:£13.29
Model: 50/05X1/4HSSE
EAN: 5027654009567
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£17.53
Ex Tax:£14.61
Model: 50/05X8MMHSSE
EAN: 5027654009574
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£14.35
Ex Tax:£11.96
Model: 50/06X8MMHSSE
EAN: 5027654009598
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£15.95
Ex Tax:£13.29
Model: 50/07X8MMHSSE
EAN: 5027654009611
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£17.53
Ex Tax:£14.61
Model: 50/08X1/4HSSE
EAN: 5027654009628
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£17.53
Ex Tax:£14.61
Model: 50/08X8MMHSSE
EAN: 5027654009635
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£14.35
Ex Tax:£11.96
Model: 50/10X1/4HSSE
EAN: 5027654009666
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£23.80
Ex Tax:£19.83
Model: 50/10X8MMHSSE
EAN: 5027654009673
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£19.62
Ex Tax:£16.35
Model: 50/14X10MMHSSE
EAN: 5027654009703
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..
£29.83
Ex Tax:£24.86