Model: C213X1/2TC
EAN: 5027654038321
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up.Neatly cuts grooves on doors or frames to accept a weatherseal...
£32.63
Ex Tax:£27.19
Model: C214X1/2TC
EAN: 5027654038147
3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb...
£52.97
Ex Tax:£44.14
Model: C215X1/2TC
EAN: 5027654037997
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees...
£32.63
Ex Tax:£27.19
Model: C215X1/4TC
EAN: 5027654038000
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees...
£32.63
Ex Tax:£27.19
Model: C216X1/2TC
EAN: 5027654038017
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees...
£38.38
Ex Tax:£31.98
Model: C217AX1/2TC
EAN: 5027654046517
Wide combination moulds for edging table tops and shelves...
£63.37
Ex Tax:£52.81
Model: C217X1/2TC
EAN: 5027654038123
Wide combination moulds for edging table tops and shelves.For stationary machines - 16000 RPM recommended speed...
£55.43
Ex Tax:£46.19
Model: C218X1/2TC
EAN: 5027654037980
Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top...
£47.71
Ex Tax:£39.76
Model: C219X1/2TC
EAN: 5027654038215
One piece tool to increase glueing area for edge to edge joint...
£55.43
Ex Tax:£46.19
Model: C220X1/4TC
EAN: 5027654038970
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door.To suit 4mm thick strip of 15mm width.Intumescent strip is used to create an effective barrier to both fire and smoke.Choose alternative bearings to..
£25.48
Ex Tax:£21.23
Model: C221X1/2TC
EAN: 5027654038963
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door.To suit 4mm thick strip of 15mm width.Intumescent strip is used to create an effective barrier to both fire and smoke.Choose alternative bearings to..
£36.30
Ex Tax:£30.25
Model: C222X1/4TC
EAN: 5027654040287
A lip and spur drill for use in a plunge router in conjunction with the Craft Dovetail jigs with doweling attachment. The drill is tungsten carbide tipped for use on natural timbers and manmade boards.This drill is used for shelf supports.The speed ra..
£11.80
Ex Tax:£9.83
Model: C223X1/2TC
EAN: 5027654046432
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door.To suit 4mm thick strip of 20mm width.Intumescent strip is used to create an effective barrier to both fire and smoke.Choose alternative bearings to..
£54.35
Ex Tax:£45.29
Model: C224X1/4TC
EAN: 5027654049495
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up.Neatly cuts grooves on doors or frames to accept a pile carrier weatherseal.Ideal for parting beads...
£36.58
Ex Tax:£30.48
Model: C225CX1/4TC
EAN: 5027654049501
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up.Neatly cuts grooves on doors or frames to accept a pile carrier weatherseal.Ideal for parting beads...
£26.51
Ex Tax:£22.09
Model: C225X1/4TC
EAN: 5027654049518
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up.Neatly cuts grooves on doors or frames to accept a pile carrier weatherseal.Ideal for parting beads...
£32.44
Ex Tax:£27.03
Model: C226X1/2TC
EAN: 5027654046449
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings...
£24.59
Ex Tax:£20.49
Model: C226X1/4TC
EAN: 5027654046456
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings...
£24.59
Ex Tax:£20.49
Model: C231X1/2TC
EAN: 5027654046494
Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specifically designed for Tonk Strip...
£25.56
Ex Tax:£21.30
Model: C231X1/4TC
EAN: 5027654045862
Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specifically designed for Tonk Strip...
£25.56
Ex Tax:£21.30