Model: C235X1/4TC
EAN: 5027654046357
Two flute TC cutter giving good chip clearance.Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel...
£14.64
Ex Tax:£12.20
Model: C236X1/4TC
EAN: 5027654046364
Two flute TC cutter giving good chip clearance.Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel...
£15.16
Ex Tax:£12.63
Model: C237X1/4TC
EAN: 5027654046371
Two flute TC cutter giving good chip clearance.Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel...
£16.14
Ex Tax:£13.45
Model: C242X1/2TC
EAN: 5027654045848
Purpose made for stair housing jigs. Ensures tight fit of tread in string...
£26.57
Ex Tax:£22.14
Model: C243X1/2TC
EAN: 5027654045855
Purpose made for stair housing jigs. Ensures tight fit of tread in string...
£27.55
Ex Tax:£22.96
Model: C250X1/2TC
EAN: 5027654045671
These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used...
£33.66
Ex Tax:£28.05
Model: C255X1/2TC
EAN: 5027654046463
A complete cutter set for producing matchlining.Jointing parts are interchanged on the arbor to change the mode of the cutter.Set Ref. C255 can be converted to Ref. 256, and vice-versa, by purchasing the respective groover...
£71.34
Ex Tax:£59.45
Model: C256X1/2TC
EAN: 5027654046470
A complete cutter set for producing matchlining.Jointing parts are interchanged on the arbor to change the mode of the cutter.Set Ref. C255 can be converted to Ref. C256, and vice-versa, by purchasing the respective groover...
£71.34
Ex Tax:£59.45
Model: C260X1/2TC
EAN: 5027654046630
Classic skirting board mould...
£47.46
Ex Tax:£39.55
Model: C265X1/4TC
EAN: 5027654046524
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded...
£42.43
Ex Tax:£35.36
Model: C266X1/2TC
EAN: 5027654046531
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded...
£39.52
Ex Tax:£32.93
Model: C270X1/4TC
EAN: 5027654046579
Designed for sash bar window construction...
£34.50
Ex Tax:£28.75
Model: C271X1/2TC
EAN: 5027654046586
Enables curved frames to be moulded...
£39.47
Ex Tax:£32.89
Model: C273X1/4TC
EAN: 5027654046685
For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses...
£39.52
Ex Tax:£32.93
Model: C305X1/4TC
EAN: 5027654059586
An initial cut with a straight cutter is required to produce the drawer pull profile. Door pull cutter can be used in various applications including top of kitchen/cabinet doors, bottom of wall units and side on taller doors...
£54.88
Ex Tax:£45.73
Model: CASE/1001
EAN: 5027654507216
Hard wearing carry cases to protect and allow for ease of carrying of the Trend COMBI1001, COMBI1002, KWJ700, KWJ900 & HR/JIGHand carry strap.Tool not included...
£33.96
Ex Tax:£28.30
Model: CASE/18
EAN: 5027654537152
Carry case for COMBI640H accessories**Accessories not included**..
£20.40
Ex Tax:£17.00
Model: CASE/DAR/200
EAN: 5027654552285
Hard wearing carry case for the DAR/200 digital angle rule.Belt loop, hanging loop/carry strap with quick release buckle.Spare battery pocket.Pen/pencil elasticated loops.Contents not included...
£6.78
Ex Tax:£5.65
Model: CASE/DG
EAN: 5027654552278
Hard wearing carry case for the Drainer Groove or Belfast Sink jig.Will accept both jigs at same time.Adjustable shoulder strap and carry handle.Flap with hook & loop fastening closer.Accessory pouch for sub bases.Can also be used for the STAIR/A and..
£26.39
Ex Tax:£21.99
Model: CASE/DLB
EAN: 5027654055328
Carry case for the DLB digital level box.Belt loop.Contents not included...
£5.24
Ex Tax:£4.37