Menu
Your Cart

S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut

S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
S64/30X1/4STC Aluminium Guided spiral 6.3x12.7 upcut
Based on 0 reviews. - Write a review
£69.17
Ex VAT: £57.64
  • Model: S64/30X1/4STC
  • Weight: 48.00g
  • EAN: 5027654051382
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
Trend Attributes
Cut Length (metric) 12.7
Diameter (metric) 6.3
Drawing Dimensions DIMENSIONS:|D1=1/4 inches|D1=6.3 mm|C=1/2 inches|C=12.7 mm|OL=72 mm|Recommended speed=12,000-18,000 rpm|
Solid carbide bearing guided router cutters for trimming aluminium sheet to a template.
Specially designed carbide with two flutes for clean finish.
Maximum trim of 3mm thick aluminium.
Double bearing guide on nose.
Recommended that a lubricant is used to

Write a review

Note: HTML is not translated!
Bad Good
IT/7070491 Grooving Cutter 14mm 150X14X30
IT/7070491 Grooving Cutter 14mm 150X14X30
Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made b..
£146.34
Ex VAT: £121.95
Add to Cart
Add to Wish List Compare this Product
IT/3409740 limitor 38mm x 4mm (pair)
IT/3409740 limitor 38mm x 4mm (pair)
Replacement limitor...
£10.64
Ex VAT: £8.87
Add to Cart
Add to Wish List Compare this Product
IT/3108543 Tc panel raiser blade 17x60x2 1 off
IT/3108543 Tc panel raiser blade 17x60x2 1 off
Replacement T.C. blade...
£43.33
Ex VAT: £36.11
Add to Cart
Add to Wish List Compare this Product
CRT/MK3L CraftPro Router Table MK3 115V - For UK sale only
CRT/MK3L CraftPro Router Table MK3 115V - For UK sale only
The CraftPro Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all p..
£302.20
Ex VAT: £251.83
Add to Cart
Add to Wish List Compare this Product
IT/3410340 limitor 38mm x 4mm (pair)
IT/3410340 limitor 38mm x 4mm (pair)
Replacement limitor...
£12.32
Ex VAT: £10.27
Add to Cart
Add to Wish List Compare this Product
C266X1/4TC Guided glazing bar cutter
C266X1/4TC Guided glazing bar cutter
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded...
£39.52
Ex VAT: £32.93
Add to Cart
Add to Wish List Compare this Product
WP-LOCK/T/181 Lock Template 22mm x 111mm faceplate
WP-LOCK/T/181 Lock Template 22mm x 111mm faceplate
Accessory template for the LOCK/JIG...
£14.98
Ex VAT: £12.48
Add to Cart
Add to Wish List Compare this Product
46/99X1/2TC Bearing guided ovolo cutter 38.1mm radius
46/99X1/2TC Bearing guided ovolo cutter 38.1mm radius
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-ov..
£119.08
Ex VAT: £99.23
Add to Cart
Add to Wish List Compare this Product
SNAP/TH2/SET Trend Snappy tool holder 60 piece bit set
SNAP/TH2/SET Trend Snappy tool holder 60 piece bit set
Heavy duty fabric tool holder with a selection of assorted Trend Snappy tools.Standard Quick Chuck which is fitted into a standard 3/8-inch key or key..
£103.75
Ex VAT: £86.46
Add to Cart
Add to Wish List Compare this Product
WP-CRTMK3/09 T-nut for edge planing knob CRT/MK3
WP-CRTMK3/09 T-nut for edge planing knob CRT/MK3
Replacement T-nut for edge planing knob for CRT/MK3...
£0.67
Ex VAT: £0.56
Add to Cart
Add to Wish List Compare this Product
39/9TC Slotter 2.5mm kerf 12mm bore
39/9TC Slotter 2.5mm kerf 12mm bore
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing..
£55.43
Ex VAT: £46.19
Add to Cart
Add to Wish List Compare this Product
C016X8MMTC Two Flute Cutter 10mm diameter
C016X8MMTC Two Flute Cutter 10mm diameter
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and ..
£11.58
Ex VAT: £9.65
Add to Cart
Add to Wish List Compare this Product